Base 220 2-Hook - Brushed Stainless Steel Finish | Beslagonline.com
Base 220 2-Hook - Brushed Stainless Steel Finish in the group Bathroom Accessories / All Bathroom Accessories / Self Adhesive Hooks  at Beslag Online (61611-21)
Base 220 2-Hook - Brushed Stainless Steel Finish
Base 220 2-Hook - Brushed Stainless Steel Finish
Base 220 2-Hook - Brushed Stainless Steel Finish
Base 220 2-Hook - Brushed Stainless Steel Finish
Base 220 2-Hook - Brushed Stainless Steel Finish
Beslag Design

Base 220 2-Hook - Brushed Stainless Steel Finish

61611-21
Base 220 2-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back, which facilitates installation, without you having to drill. Base 220 hooks is available in three sizes; 1-hook, 2-hook and 3-hook and four designs; matt black, brushed stainless steel, brass and chrome.

The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. Hooks for both the towel and the bathrobe. The rounded edges of the back plate create a soft feeling and the circular details at the far end of the hook create a stylish design, but are also practical as, for example, the towel does not fall down as easily when suspended.

Installation Instructions:
  1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.
  2. Remove the protective film.
  3. Apply the product by pressing it against the substrate for 10 seconds.
  4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.
Cleaning: Use a clean, damp cloth when cleaning the product.

NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

 
Show more
Available varieties:
Base 220 2-Hook - Chrome/bilder/artiklar/liten/61612-21_S.jpg?m=1629362802
Base 220 2-Hook - Matte Black/bilder/artiklar/liten/61610-21_S.jpg?m=1629358810
Base 220 2-Hook - Polished Brass/bilder/artiklar/liten/61613-21_S.jpg?m=1629363471
Show moreShow less
€11.50
Delivery: 
Qty: 
Add to cart
  • Specifications
  • Length: 90 mm
    Width: 45 mm
    Depth: 31 mm
    Material: Stainless Steel
    Finish: Brushed Stainless Steel
    Model: Hook
    Style: Classic, Modern
    Maximum Weight: 5 kg
    Brand: Beslag Design
  • Reviews
  • Care & maintenance
  • Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.  

    Thoroughly clean the surface before mounting so that it is free of oil and dirt, avoid cleaning agents that contain oil. Feel free to buy our surface cleaning napkin, to make sure that the surface is properly clean during installation. Let the product sit on the selected surface for at least 24 hours before you start to use the product. 

    Installation Instructions:

    1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product. 
    2. Remove the protective film. 
    3. Apply the product by pressing it against the substrate for 10 seconds. 
    4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.  


    When it's time to clean the product, we recommend that you use a clean, damp, wrung-out cloth. Depending on the material, the product may be damaged by cleaning agents and the surface may change, therefore we recommend that you use lukewarm water.
     

Accessories we recommend

3M Surface Cleaner Sachet /bilder/artiklar/liten/60404-BO_S.jpg?m=1644931320
€2.90
Base 200 Toilet Roll Holder - Brushed Stainless Steel /bilder/artiklar/liten/60604-21_S.jpg?m=1574369706
Beslag Design
Self-adhesive 3M-tape
€21.40
Base 200 Towel Rail - Brushed Stainless Steel /bilder/artiklar/liten/606047-21_S.jpg?m=1602495771
Beslag Design
Self-adhesive 3M-tape
€33.40
Base 220 1-Hook - Brushed Stainless Steel Finish /bilder/artiklar/liten/61601-21_S.jpg?m=1629295478
Beslag Design
Self-adhesive 3M-tape
€6.90
Base 220 3-Hook - Brushed Stainless Steel Finish /bilder/artiklar/liten/61621-21_S.jpg?m=1629380609
Beslag Design
Self-adhesive 3M-tape
€17.10
Base Shelf - Brushed Stainless Steel /bilder/artiklar/liten/606061-41_S.jpg?m=1571043435
Beslag Design
Self-adhesive 3M-tape
€53.10
15
DEAL
Bathroom Kit Base 220 - Brushed Stainless Steel Finish /bilder/artiklar/liten/61611-K_S.jpg?m=1632994972
Beslag Design
Self-adhesive 3M-tape
€95.50 €112.40
Solid Toilet Brush - Brushed Stainless Steel Finish /bilder/artiklar/liten/620030_S.jpg?m=1583747693
Beslag Design
Self-adhesive 3M-tape
€58.30

Related products

POPULAR
Edge Pull Lip - 120mm - Black /bilder/artiklar/liten/343458-11_S.jpg?m=1573047072
Beslag Design
Available in several lengths
€16.90
Strand 2-Hook - Brushed Stainless Steel Finish /bilder/artiklar/liten/606200-21_S.jpg?m=1628082387
Beslag Design
Screw pin for wall
€9.20
POPULAR
Cabinet Knob Helix - Matte Black /bilder/artiklar/liten/kn-helix-mattsvart_S.jpg?m=1645613096
Beslag Design
Available in several sizes
From €9.60
Handle Pitch/Back Plate - Matte Black /bilder/artiklar/liten/htg-pitch-svart-bricka_S.jpg?m=1583255504
Beslag Design
Available in several lengths
From €36.30

WE WILL HELP YOU

In our FAQ you will find answers to the most common questions. Can't find the answer to your question? Chat with us or contact us via email and we will be happy to help you.

CUSTOMER SERVICE