Bathroom Kit Base 210 - Chrome

The bathroom kit Base 210 has everything you need for your new bathroom or if you want to renew your existing bathroom. Base 210 is one of our series of bathroom accessories, which are completely made of stainless steel. All products have a self-adhesive tape on the back of the products, which means that they can be mounted without drilling. Bathroom kit Base 210 is available in Chrome, stainless steel, matte black and polished brass.

The package includes the following products:

• 1 pc of 61412-21 - Base 210 2-Hook - Chrome
• 1 pc of 606026-21 - Base 200 Spare paper holder - Chrome
• 1 pc of 60603-21 - Base 200 Toilet paper holder - Chrome
• 1 pc of 620010 - Solid toilet brush - Chrome

Installation Instructions:

1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.
2. Remove the protective film.
3. Apply the product by pressing it against the substrate for 10 seconds.
4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.

Cleaning: Use a clean, damp cloth when cleaning the product.

NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

 

Show more

Show less

Available varieties:

/bilder/artiklar/liten/61411-K_S.jpg?m=1633081783

/bilder/artiklar/liten/61410-K_S.jpg?m=1633076788

/bilder/artiklar/liten/61413-K_S.jpg?m=1633078641

Show moreShow less

Qty:

Add to cart

• Specifications

• Material:	Stainless Steel
  Finish:	Chrome
  Model:	Bathroom Kit
  Style:	Classic, Modern
  Other information:	Self-adhesive 3M-tape
  Brand:	Beslag Design
• Reviews
• Care & maintenance

• Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.  

  Thoroughly clean the surface before mounting so that it is free of oil and dirt, avoid cleaning agents that contain oil. Feel free to buy our surface cleaning napkin, to make sure that the surface is properly clean during installation. Let the product sit on the selected surface for at least 24 hours before you start to use the product. 

  Installation Instructions:
  

  1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product. 
  2. Remove the protective film. 
  3. Apply the product by pressing it against the substrate for 10 seconds. 
  4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.  

  
  When it's time to clean the product, we recommend that you use a clean, damp, wrung-out cloth. Depending on the material, the product may be damaged by cleaning agents and the surface may change, therefore we recommend that you use lukewarm water.