Solid Towel Rail - Brushed Stainless Steel | Beslagonline.com
Solid Towel Rail - Brushed Stainless Steel in the group Bathroom Accessories / All Bathroom Accessories / Towel Racks at Beslag Online (620034)
Solid towel rack in stainless steel look
Solid Towel Rail - Brushed Stainless Steel
Solid Towel Rail - Brushed Stainless Steel
Solid Towel Rail - Brushed Stainless Steel
Solid Towel Rail - Brushed Stainless Steel
Beslag Design

Solid Towel Rail - Brushed Stainless Steel

620034

Solid is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Solid towel rail is available in two different designs; Chrome and brushed stainless steel.

The towel rack has two adherences, in order for the towel rack to achieve the best possible adhesive ability it is important that the surface which the towel rack is to be mounted on, is smooth. In the case that the two different adherences are to be mounted on two different tiles, it is extra important to check that the tiles are leveled.

Installation Instructions:
  1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.
  2. Remove the protective film.
  3. Apply the product by pressing it against the substrate for 10 seconds.
  4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.
Cleaning: Use a clean, damp cloth when cleaning the product.

NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.


 
Show more
Available varieties:
Solid Towel Rail - Chrome/bilder/artiklar/liten/620014_S.jpg?m=1602499490
Show moreShow less
€36.60
Delivery: 
Qty: 
Add to cart
  • Specifications
  • Length: 630 mm
    Width: 63 mm
    Depth: 50 mm
    Height: 63 mm
    Material: Stainless Steel
    Finish: Brushed Stainless Steel
    Model: Towel Rail
    Style: Modern
    Maximum Weight: 1,5 kg
    Other information: Self-adhesive 3M-tape
    Brand: Beslag Design
  • Reviews
  • Care & maintenance
  • Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.  

    The towel rack has two adherences, in order for the towel rack to achieve the best possible adhesive ability it is important that the surface which the towel rack is to be mounted on, is smooth. In the case that the two different adherences are to be mounted on two different tiles, it is extra important to check that the tiles are leveled.

    Thoroughly clean the surface before mounting so that it is free of oil and dirt, avoid cleaning agents that contain oil. Feel free to buy our surface cleaning napkin, to make sure that the surface is properly clean during installation. Let the product sit on the selected surface for at least 24 hours before you start to use the product. 

    Installation Instructions:

    1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product. 
    2. Remove the protective film. 
    3. Apply the product by pressing it against the substrate for 10 seconds. 
    4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.  


    When it's time to clean the product, we recommend that you use a clean, damp, wrung-out cloth. Depending on the material, the product may be damaged by cleaning agents and the surface may change, therefore we recommend that you use lukewarm water.
     

Accessories we recommend

3M Surface Cleaner Sachet /bilder/artiklar/liten/60404-BO_S.jpg?m=1644931320
€2.90
Solid 1-Hook - Brushed Stainless Steel Finish (2-pack) /bilder/artiklar/liten/620021-21_S.jpg?m=1583489625
Beslag Design
Self-adhesive 3M-tape
€11.90
Solid 2-Hook - Brushed Stainless Steel Finish /bilder/artiklar/liten/620022-21_S.jpg?m=1583490291
Beslag Design
Self-adhesive 3M-tape
€11.60
Solid 4-Hook - Brushed Stainless Steel Finish /bilder/artiklar/liten/620024-21_S.jpg?m=1583489956
Beslag Design
Self-adhesive 3M-tape
€23.60
Solid Paper Holder With Lid - Brushed Stainless Steel Finish /bilder/artiklar/liten/620027_S.jpg?m=1583767786
€45.40
Solid Toilet Brush - Brushed Stainless Steel Finish /bilder/artiklar/liten/620030_S.jpg?m=1583747693
Beslag Design
Self-adhesive 3M-tape
€58.30
Solid Toilet Roll Holder - Brushed Stainless Steel Finish /bilder/artiklar/liten/620026_S.jpg?m=1583767442
Beslag Design
Self-adhesive 3M-tape
€20.70

Related products

RETRO
Handle 1690 - 101mm - Nickel plated /bilder/artiklar/liten/39711-11_S.jpg?m=1593769746
25
RETRO
Handle 5182 - Stainless Steel Finish (incl. screw) /bilder/artiklar/liten/397959-11_S.jpg?m=1594018784
30
RETRO
Handle 5181U Ticka - Stainless Steel Stainless Steel Finish /bilder/artiklar/liten/397955-11_S.jpg?m=1585833628
POPULAR
Cabinet Knob Mynta - Polished Nickel /bilder/artiklar/liten/308636-11_S.jpg?m=1593613293

WE WILL HELP YOU

In our FAQ you will find answers to the most common questions. Can't find the answer to your question? Chat with us or contact us via email and we will be happy to help you.

CUSTOMER SERVICE