Cool-Line - Wastebasket Wall - CL263 - Stainless Steel60263
- 100% Price guarantee
- Free delivery over €49
- 60 days right of withdrawal
Dimensions & assembly
Length: 300 mm Width: 360 mm Depth: 176 mm Material: Stainless Steel Finish: Stainless Steel Style: Classic, Modern Screws included: Complete with mounting kit Brand: Beslag Design
Installation of wall hooks
Mount the hook on the wall with the included screws.
Consider using a drill to pre-drill the hole in the wall. Depending on the material your wall is made of, you may need a different screw.
Installation of 3M products
Clean the surface thoroughly before installation so that it is free of oil and dirt, and avoid cleaning agents that contain oil. Feel free to purchase our surface cleaning wipe to ensure that the surface is properly cleaned during installation. Allow the product to sit on the selected surface for at least 24 hours before you start loading the product.
Note! Attaches to permanent smooth surfaces such as tiles, lacquered or veneered board materials, etc. Be careful not to place the product over the joint.
1. Select a smooth surface and determine the location for the product. Be careful not to place the product over the joint.
2. Clean the substrate carefully with 3M surface cleaning wipe, click here to get to the product.
3. Remove the protective film.
4. Apply the product by pressing it against the substrate for 10 seconds.
5. For optimal adhesion, let the glue harden for 24 hours before loading the product.
6. After 24 hours, the product is ready to use.
More info & care advice
Stainless steel is a sturdy material, which is resistant to stains, rust, and corrosion. However, there may be changes in the material that needs care.
If the stainless-steel product has stains or discoloration that cannot be washed off with a wrung-out cloth, we recommend the following cleaning methods:
Wash off the product with alcohol, e.g., thinner or acetone. – Rinse off the product with water and dry.
Wash off the product with organic solvents, e.g., white spirit or thinner. Finish by washing off with soap and cold water. Wipe off the product.
Use a mild abrasive detergent, e.g., scouring powder. Rub in the same direction as the structure of the product. Rinse off with cold water and dry the product.
Use 10 percent phosphoric acid solution, rinse with diluted ammonia solution, followed by cold water. Wipe off the product.
Rub lightly with a scotch-Brite sponge - a cleaning sponge, soft on one side and tougher on the other. Follow any structure. Rinse off with cold water and dry the product.
Brand - Beslag Design
Beslag Online is part of Beslag Design, which has more than 50 years of experience in the areas of fittings and interior products. Beslag Design started its journey in 1972 and today has Sweden's widest range of handles and knobs for both kitchens, bathrooms, wardrobes and furniture. With over 1,000 different models to choose from, there really is something for every style. Beslag Design are known for their high quality and breadth of range that captures the latest trends.
"Details that make the whole"
Wipe with a clean slightly damp cloth. Avoid detergents as they may contain chemicals that affect the surface negatively. Can also be cleaned with a microfiber cloth.
Delivery & return
Delivery informationDelivery to service point - UPS €5.33Free shipping on all orders over £49Delivery 3-5 days on stock itemsDelivery to service point - DB Schenker €5.60
Free shipping on all orders over £49Delivery 3-5 days on stock items
Please note that the delivery time is based on the products you have ordered, on our website, an approximate delivery time is shown for each product. This is the delivery time that applies unless otherwise stated.
Beslag Online offers a right of withdrawal for 60 days, valid from the day you received your goods. The goods need to be returned in an unchanged condition in order for you as a customer to receive full credit. We do not offer any free returns as part of our environmental thinking, there is a return fee of €5.